Dell POWEREDGE M1000E - Manual (Page 101)

Setting Description
Set iDRAC Root Password on Server Insertion Specifies whether a server’s iDRAC root password must
be changed to the value provided in the iDRAC Root
Password field when the server is inserted.
iDRAC Root Password When Set iDRAC Root Password on Server Insertion
and QuickDeploy Enabled options are selected, this
password value is assigned to a server's iDRAC root
user password when the server is inserted into chassis.
The password can have 1 to 20 printable (including
spaces) characters.
Confirm iDRAC Root Password Verifies the password entered into the iDRAC Root
Password field.
Enable iDRAC LAN Enables or disables the iDRAC LAN channel. By default,
this option is disabled.
Enable iDRAC IPv4 Enables or disables IPv4 on iDRAC. By default, this
option is enabled.
Enable iDRAC IPMI over LAN Enables or disables the IPMI over LAN channel for each
iDRAC present in the chassis.By default, it is disabled.
Enable iDRAC DHCP Enables or disables DHCP for each iDRAC present in the
chassis. If this option is enabled, the fields QuickDeploy
IP, QuickDeploy Subnet Mask, and QuickDeploy
Gateway are disabled, and cannot be modified since
DHCP is used to automatically assign these settings for
each iDRAC. By default, this option is disabled.
Reserved QuickDeploy IP Addresses Enables you to select the number of static IPv4
addresses reserved for the iDRACs in the chassis. The
IPv4 addresses starting from Starting iDRAC IPv4
Address (Slot 1) are considered as reserved and
assumed to be unused elsewhere in the same network.
Quick Deploy feature does not work for servers that are
inserted into slots for which there is no reserved static
IPv4 address. The maximum number of static IP
Addresses reserved for:
– Qurter-height servers are 32 IP addresses.
– Half-height servers are 16 IP addresses.
– Full-height servers are 8 IP addresses.
101