Dell C3765dnf Color Laser Printer - Manual (Page 503)

Maintaining Your Printer 501
Entering Values
When Using the Operator Panel
Using the operator panel, enter the values found in the color registration chart to make adjustments.
1 Press the (Information) button.
2 Select the Tools tab, and then select Admin Settings.
3 Select Maintenance.
4 Select
until Color Reg Adjust appears, and then select Color Reg Adjust.
5 Select Enter Number.
6 Select - or + to specify the values for left colors (LY, LM, and LC), and then select Next.
7 Select - or + to specify the values for right colors (RY, RM, and RC), and then select Next.
8 Select - or + to specify the values for process colors (PY, PM, and PC), and then select OK.
NOTE: The registration values are always shown as 0 the next time you enter the menu.
9 Select Color Regi Chart.
10 Select Print.
The color registration chart with the new values is printed.
If the straightest line is not at the value of 0, adjust the values again. Checking the charts before and after the
adjustments will help you to determine the values to enter.