beautypg.com

Installing printer drivers on windows® computers, Identifying printer driver pre-install status, Inserting the software and documentation disc – Dell C3765dnf Color Laser Printer User Manual

Page 93: Installing printer drivers on windows, 10 installing printer drivers on windows, Computers

background image

Installing Printer Drivers on Windows

®

Computers

91

10

Installing Printer Drivers on Windows

®

Computers

Identifying Printer Driver Pre-install Status

Before installing the printer driver on your computer, check the IP address of your printer by performing one of the

procedures in "Verifying the IP Settings."

Changing the firewall settings before installing your printer

If you are running one of the following operating systems, you must change the firewall settings before installing the

Dell printer software:

• Microsoft

®

Windows XP

• Windows Vista

®

• Windows 7
• Windows 8
• Windows Server

®

2008

• Windows Server 2008 R2
• Windows Server 2012

NOTE:

For Windows XP, Service Pack 2 or 3 must be installed.

The following procedure uses Windows 7 as an example.

1 Insert the

Software and Documentation

disc into your computer.

2 Click StartControl Panel.
3 Select System and Security.
4 Click Allow a program through Windows Firewall.
5 Click Change settingsAllow another program.
6 Check Browse.
7 D:\setup_assist.exe (where D is the drive letter of the optical drive) in the File name text box, and then

click Open.

8 Click Add, and then click OK.

Inserting the Software and Documentation Disc

1 Insert the

Software and Documentation

disc into your computer and click setup_assist.exe to start Easy Setup

Navigator.

NOTE:

If the Software and Documentation disc does not launch automatically, follow the procedure below.

For Windows XP, Windows Server 2008, and Windows Server 2008 R2
Click

start Run, enter

D:\setup_assist.exe

(where D is the drive letter of the optical drive) in the Run dialog

box, and then click OK.
For Windows Vista and Windows 7
Click

Start All ProgramsAccessoriesRun, enter

D:\setup_assist.exe

(where D is the drive letter of

the optical drive) in the Run dialog box, and then click OK.