Dell C3765dnf Color Laser Printer - Manual (Page 245)

Understanding the Printer Menus 243
Purpose:
To confirm the wireless communication status.
Values:
Wireless Setup Wizard
NOTE: Wireless Setup Wizard is available only when the printer is connected using the wireless network.
Purpose:
To configure the wireless network interface.
Values:
Status Good
Acceptable
Low
No Reception
SSID Displays the name that identifies the wireless network.
Encryption Type Displays the encryption type.
Select Access Select the access point from the list.
WEP Key When you select an access point using WEP as the
encryption type, enter the WEP key.
Pass Phrase When you select an access point using WPA, WPA2, or
Mixed as the encryption type, enter the pass phrase.
Manual SSID Setup Enter SSID Specifies a name to identify the wireless network. Up to 32
alphanumeric characters can be entered.
Infrastructure Select when you configure the wireless setting through the
access point such as a wireless router.
No Security Specifies No Security to configure the wireless setting
without specifying a encryption type from WEP, WPA-PSK-
TKIP, and WPA-PSK-AES.
Mixed mode PSK * Select to configure the wireless setting with the encryption
type of Mixed mode PSK. Mixed mode PSK automatically
selects the encryption type from either WPA-PSK-TKIP,
WPA-PSK-AES, or WPA2-PSK-AES.
Pass Phrase
Specifies the passphrase of
alphanumeric characters from 8 to 63.
WPA-PSK-TKIP Select to configure the wireless setting with the encryption
type of WPA-PSK-TKIP.
Pass Phrase
Specifies the passphrase of
alphanumeric characters from 8 to 63.
WPA2-PSK-AES Select to configure the wireless setting with the encryption
type of WPA2-PSK-AES.
Pass Phrase
Specifies the passphrase of
alphanumeric characters from 8 to 63.
WEP Specifies the WEP key to use through the wireless network.
For 64bit keys, up to 10 hexadecimal characters can be
entered. For 128bit keys, up to 26 hexadecimal characters
can be entered.