Dell C3765dnf Color Laser Printer - Manual (Page 228)

226 Understanding the Tool Box Menus
Fax Settings
Purpose:
To specify the fax settings.
Values:
Collation Collated Sorts the print job.
Uncollated Does not sort the print job.
Apply New Settings After you change the settings, click this button to apply the changes.
Restart printer to apply new settings Click this button to restart the printer and apply the changes.
*1 This item is available only when the optional 550-sheet feeder is installed.
Fax Number Sets the fax number of the printer, which will be printed on the
header of faxes.
Country Selects the country where the printer is used.
Fax Header Name Sets the sender's name to be printed on the header on faxes.
Line Type PSTN Sets the default line type to PSTN.
PBX Sets the default line type to PBX.
Line Monitor Off Turns off the volume of the line monitor, which audibly monitors a
transmission through the internal speaker until a connection is made.
Low Sets the volume of the line monitor.
Medium
High
DRPD Pattern Pattern1–7 Provides a separate number for faxing with a distinctive ring pattern.
Receive Mode Telephone Sets the default fax receiving mode to Telephone.
Fax Sets the default fax receiving mode to Fax.
Telephone / Fax Sets the default fax receiving mode to Telephone / Fax.
Ans Machine / Fax Sets the default fax receiving mode to Ans Machine / Fax.
DRPD Sets the default fax receiving mode to DRPD.
Ring Tone Volume Off Turns the volume of the ring tone, which indicates that an incoming
call is a telephone call through the internal speaker when Receive
Mode is set to Telephone / Fax.
Low Sets the volume of the ring tone.
Medium
High
Auto Receive Fax Available Range: 0–255 seconds Sets the interval at which the printer goes into the fax receive mode
after receiving an incoming call in 0 to 255 seconds.
Auto Receive Tel/Fax Available Range: 0–255 seconds Sets the interval at which the printer goes into the fax receive mode
after the external telephone receives an incoming call in 0 to 255
seconds.
Auto Receive
Ans/Fax
Available Range: 0–255 seconds Sets the interval at which the printer goes into the fax mode after the
external answering machine receives an incoming call in 0 to 255
seconds.