Dell C3765dnf Color Laser Printer - Manual (Page 377)

Faxing 375
NOTE: Prefix Dial supports only the environment where you send a fax to the external line number. To use Prefix Dial, you must
do the following from the operator panel.
1 Press the (Information) button.
2 Select the Tools tab, and then select Admin Settings.
3 Select
until Fax Settings appears, and then select Fax Settings.
4 Select Fax Line Settings.
5 Select
until Line Type appears, and then select Line Type.
6 Select PBX, and then OK.
7 Select .
8 Select Transmission Defaults.
9 Select
until Prefix Dial appears, and then select Prefix Dial.
10 Select On.
11 Select the Prefix Dial Number box.
12 Enter a prefix number using the number pad, and then select OK. The characters you can use for a prefix number
are 0–9, *, and #. The maximum number of characters for a prefix number is five.
Prefix Dial You can specify whether or not to set a prefix dial number. When
you set Prefix Dial to On , the number set in Prefix
Dial Number dials before any auto dial number is started. It is
useful for accessing the Private Automatic Branch Exchange
(PBX). You can set a prefix dial number of up to five digits.
Fax Cover Page You can set whether to attach a cover page to faxes when sending
faxes.
Fax Header Prints the sender’s information on the header of faxes.
Select
Off to turn this feature off.
Select On to turn this feature on.
Note that if United States is selected for the setting of Country,
this option does not appear on the menu. The setting is fixed to
On and cannot be changed.
For information on the country setting, see "Setting Your
Country."
ECM You can set whether to enable or disable the ECM (Error
Correction Mode).
Modem Speed You can set the modem speed.
Display Manual
Fax Recipients
You can set whether to display the fax number of the recipient on
the Sending Fax screen when manually sending a fax.
Fax Reports Fax Activity You can set whether to automatically print a fax activity report
after every 50 incoming and outgoing fax communications.
Fax Transmit You can set whether to print a transmission result after a fax
transmission.
Fax Broadcast You can set whether to print a transmission result after a fax
transmission to multiple locations.
Fax Protocol You can set whether to print the protocol monitor report after a fax
transmission to monitor fax protocol problems.
Option Description