Dell C3765dnf Color Laser Printer - Manual (Page 339)

Copying 337
2-Up
To print two original images to fit onto one sheet of paper:
1 Select the Output tab, and then select 2-Up.
2 Select the desired setting, and then select OK.
* Denotes the factory default setting.
When you are using the document glass and it is set to Auto or Manual, the display prompts you for another
page after pressing the (Start) button.
a If you want to place a new document, replace the document with a new document, and then select
Continue or press the
(Start) button.
b If you finish copying, select Print Now.
NOTE: When you use the DADF to copy both sides of a document, the printed position of the front and back of the document
may differ if the size in the document size setting and the size of the document do not match. In this case, set Original
Size to the same size as the document.
Off* Does not perform multiple-up printing.
Auto Automatically reduces the original pages to fit onto one sheet of paper.
Manual Prints the original pages onto the one sheet of paper in the size specified in Reduce / Enlarge.
Auto:
Automatically
reduces the
pages to fit in
one page.
Manual:
Reduces the
pages in the
custom size
depending on the
setting of the
Reduce / Enlarge
menu.