Dell C3765dnf Color Laser Printer - Manual (Page 75)

Connecting Your Printer 73
Network Connection
To connect the printer to a network:
1 Connect the Ethernet cable.
To connect the printer to the network, connect one end of an Ethernet cable into the Ethernet port on the rear of
the printer, and the other end to a LAN drop or hub. To setup a wireless connection, insert the wireless adapter into
the wireless adapter socket on the back of the printer.
For a wireless connection, see "Installing the Optional Wireless Adapter."
NOTE: To use the wireless adapter, be sure to disconnect the Ethernet cable.
Connecting the Telephone Line
CAUTION: Do not connect your printer directly to a Digital Subscriber Line (DSL). This may damage the printer. To use a DSL,
you will need to use an appropriate DSL filter. Contact your service provider for the DSL filter.
1 Connect one end of a telephone line cord into the wall jack connector and the other end into an active wall jack.
1 Ethernet port
1
1
Wall jack connector
To the wall jack