Figure 3. blue service button location – Unitec Wash Select II With WashPay Integration Operations Manual User Manual
Page 44
W A S H
S E L E C T
I I
Document Number:
WS21058
32
Enable Coupon
1.
Press the blue service button directly on the back of the bill feed opening, below
the bill stacker.
Top
of B
ill Stacker
B
lu
e
S
e
rv
ic
e
B
u
tt
o
n
Figure 3. Blue Service Button Location
2.
The Bezel Lights on the bill acceptor opening will start blinking.
3.
Feed the coupon you want to be enabled.
4.
The coupon will be drawn into the bill validator, and then will be ejected.
5.
The flash code LED (see Section 4.3.1.3) will flash 10 times to indicate the
coupon is enabled.
Disable Coupons
1.
Press the blue service button directly on the back of the bill feed opening, below
the bill stacker.
2.
The Bezel Lights on the bill acceptor opening will start blinking.
3.
Feed the coupon you want to be disabled.
4.
Coupon will be drawn into the bill validator, and then will be ejected.
5.
The flash code LED (see Section 4.3.1.3) will flash 3 times to indicate the coupon
is disabled.
Document Title:
WSII Operations Manual ver 6.10