Unitec Wash Select II With WashPay Integration Operations Manual - Manual (Page 24)

W A S H S E L E C T I I
Document Number: WS21058 12
Document Title: WSII Operations Manual ver 6.10
3. Enter the amount of tax in percent form (0.00%) and press the (*) key to enter.
2.2 Wash and Option Names and Prices
The wash names and prices and added services (options) are programmed in the WashPay
server. For further instructions, see the Sierra Management Application Programming Manual
at www.StartwithUnitec.com
2.3 Speech Menu
The functions in this menu will allow you to configure and test the optional speech module
card. This card attaches to the middle of the CPU board of the Wash Select II.
2.3.1 Playback Messages
This function will allow you to playback each of the 24 speech messages. When you enter
the play message function, choose the message you wish to hear. The following steps will
walk you through the “Playback Messages” function.
4. Place the WSII in Setup mode. Scroll to: Speech (*) Play Message (*)
5. Enter the number of the message you wish to hear or press (0) to hear all
messages.
Once you have entered the message number, the display will show you the message name,
message number and the length of the message played.
E X A M P L E :
GREETING MESSAGE
PLAYING: 1 10.25S
The first line shows the message name. The second line shows that message number 1 is
playing and that it is 10.25 seconds long. For more information regarding messages, refer to
the “Speech Message Script” in Section 3.6.
2.3.2 Record Messages
Using this function will allow you to record a speech message. This function requires a
microphone. Instructions and tips for recording speech messages are found in Section 3.6 of
this manual.
1. Plug the microphone into the top of the CPU board.
2. Place the WSII in Setup mode. Scroll to: Speech (*) Record Message (*)
3. Enter the number of the message you wish to record (1-24). Press (*).
4. Record the message.