Unitec Wash Select II With WashPay Integration Operations Manual - Manual (Page 22)

W A S H S E L E C T I I
Document Number: WS21058 10
Document Title: WSII Operations Manual ver 6.10
DB-DEBIT 0 $0.00
VF-VISA FLEET 0 $0.00
MF-MC FLEET 0 $0.00
WF-WRIGHT EXP 0 $0.00
PL-SHEETZ ADV 0 $0.00
YF-VOYAGER 0 $0.00
FF-FLEET ONE 0 $0.00
FC-FLEETCOR 0 $0.00
OTHER 0 $0.00
Note:
The credit cards types in the Captured Credit Sale section shown in the samples are for
Credit Mode 5. In other Credit Modes, only Amex, Visa, MC, Discover and Other are
shown.
2.1.5 Clearing the Transaction History
This function will clear all information in the “Credit Transaction History”. If you periodically
print a “Credit Transaction” report for record keeping, you may want to clear the information
after you receive a successful print out.
Follow the steps below to clear your “Credit Transaction History”:
1. Place the WSII in Setup mode. Scroll to: Credit System (*) Clear Trans Hist (*)
2. You will be asked “Clear Credit History?” Press the (1) key for YES or the (3) key
for NO, at this point the display will read “History Cleared”.
2.1.6 Credit + Coupon
The Credit + Coupon feature allows a coupon fleet account customer to use a credit card to
upgrade their wash package using a credit card prior to selecting a wash package. This
setting is enabled by default. Note that this setting does not affect the use of VIP coupons in
any way.
Follow the steps below to enable the “Credit + Coupon” feature.
1. Place the WSII in Setup mode. Scroll to: Credit System (*) Credit & Coupon (*)
2. You will be asked “Coupon & Credit?” Press the (1) key for YES or the (3) key for
NO.
2.1.7 Batch Functions
All batching functions are not applicable when the Wash Select II is integrated with the
WashPay server.