Unitec Wash Select II With WashPay Integration Operations Manual - Manual (Page 25)

W A S H S E L E C T I I
Document Number: WS21058 13
Document Title: WSII Operations Manual ver 6.10
2.3.3 Set Greeting Start Delay
This function is used to set the amount of time that the Wash Select II will wait to activate the
greeting message after the Proximity sensor detects the presence of a vehicle. This delay is
usually set to give the customer enough time to roll down the window once they have
stopped in front of the Wash Select II. This time may be set between 0 and 10 seconds. The
system default setting is three seconds. Follow the steps below to set the greeting start delay
time.
1. Place the WSII in Setup mode. Scroll to: Speech (*) Greeting Delay (*)
2. Enter the length of time you wish the Wash Select II to wait before activating the
greeting message (0-10 seconds), and then press the (*) key.
2.3.4 Set Greeting Repeat Delay
Using this feature, you will set the greeting message repeat delay. This is the amount of time
that the Wash Select II will wait before repeating the message if the customer has not
responded by selecting a wash, entering cash or swiping a credit card. The greeting repeat
delay may be set between 0 and 60 seconds. This default setting is 20 seconds. Follow the
steps below to set the greeting repeat delay time.
3. Place the WSII in Setup mode. Scroll to: Speech (*) Repeat Delay (*)
4. Enter the amount of time you wish the Wash Select II to wait before repeating the
message, and then press the (*) key.
2.3.5 Printing Message List
Using this command, you can print a list of speech messages. The list will show the message
number, message name and the length of the message. To print the message list, follow the
steps below.
1. Place the WSII in Setup mode. Scroll to: Speech (*) Print Msg List (*)
2. The message list will begin to print.
2.3.6 Viewing Current Message List
If you do not have the optional thermal printer, you may view the message list using this
function. The list will show the message number, name and the length of the message.
Follow the steps below to view the current message list.
1. Place the WSII in Setup mode. Scroll to: Speech (*) Play Message (*) View Msg
List (*)
2. You will need to use the (3) button to scroll forward to view the next message and
the (1) key to return to the previous one.