Unitec Wash Select II With WashPay Integration Operations Manual - Manual (Page 34)

W A S H S E L E C T I I
Document Number: WS21058 22
Document Title: WSII Operations Manual ver 6.10
2.6.1 Customer Stacking
This feature allows you to enable or disable the ability for the Wash Select II to interact with a
customer in front of it while the wash is in use.
ENABLED – When this feature is enabled, it allows the Wash Select II to interact with a
customer at the coin box while another customer is using the wash. The Wash Select II will
greet the customer, allow the purchase of a wash and if the previous customer has not
completed their wash, they will be instructed to please wait until the wash is no longer in use.
DISABLED – The Wash Select II will not allow any interaction at the coin box while the wash
is in use.
The steps below will help you to enable this feature.
1. Place the WSII in Setup mode. Scroll to: Cust. Interface (*) Cust. Stacking (*)
2. Press the (1) button for “YES” (Enabled) or the (3) button for “NO” (Disabled).
Default: Enabled
2.6.2 Forced Selection
The “Forced Selection” feature will force a wash selection by the customer for all cash and
token purchases. This setting will not affect Credit or Fleet transaction.
Note:
If “Allow Upgrades” is disabled while “Forced Selection” is also disabled, the Wash
Select II will automatically enable Forced Selection.
ENABLED – With this feature enabled, the customer must make a wash selection before a
wash is activated. If a customer adds cash or tokens without selecting, the Wash Select II will
instruct them to make a selection. At this point, all wash displays for which the customer has
deposited enough money/tokens to purchase will begin to flash and the current credited
amount will be displayed.
DISABLED – If this feature is disabled, once a customer deposits enough cash/tokens to pay
for the least expensive wash that wash will be armed. For example: A customer adds $1 bills
one at a time until there is a credit of $4, the $4 wash would automatically be armed.
However, if the customer adds enough cash/tokens to pay for a more expensive wash, that
wash will be armed. The customer cannot make another selection or receive change.
Follow the steps below to enable “Forced Selection”.
1. Place the WSII in Setup mode. Scroll to: Cust. Interface (*) Forced Selection (*)
2. Press the (1) button for “YES” (Enabled) or the (3) button for “NO” (Disabled).
Default: Enabled