Banner PresencePLUS BCR 1.3 Series - Manual (Page 50)

• If you select Ethernet (RJ 45), the Connection IP Address shows the IP address for which the
software is looking. Initially, the IP address should be 192.168.0.1, the default IP address of the
sensor.
• If you select Serial, the IP address is not applicable.
6.1.3 IP Address History
Use this button to view previous IP Addresses and Subnet Masks.
P/N 000000 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
50
7/2009 System Setup Window Overview