Banner PresencePLUS BCR 1.3 Series - Manual (Page 120)

From the drop-down list select the pixels to sample: Every Pixel,
Every 2
nd
Pixel or Every 4
th
Pixel.
Samples Per Pixel
Change the value for Min and Max Bead Width by using the arrow keys
in each field, or by typing the desired value. Bead Width
Check this box if you want the software to ignore boundary pixels.
Boundary pixels are bead pixels that touch the ROI. If you choose to
ignore boundary pixels, you might ignore one or more segments. Ignore Boundary Pixels
Results
The full list of results for the following bead are noted in the table below.
P/N 000000 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
120
7/2009 PresencePLUS Software Tools