Banner PresencePLUS BCR 1.3 Series - Manual (Page 129)

Additional Information Description Character
Settings
Use the up and down arrow
controls to specify the stroke Min Stroke
Thickness
thickness of the characters. This is
used to eliminate spurious marks
that might result in false-positive
identification of characters.
Enhanced Character Settings
The enhanced OCR/OCV settings provide for fine-tuning how the sensor boxes characters. To enable Enhanced
OCR/OCV tools:
1. Click the System button on the UI to display the System Setup dialog.
2. Select the Tools Configuration tab.
3. Check the box next to Enhanced under OCR and/or OCV.
129 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
P/N 000000
PresencePLUS Software Tools 7/2009