Banner PresencePLUS BCR 1.3 Series - Manual (Page 201)

Measure Tool Pattern Find/Count Tab
On the Pattern Find tab, use the drop-down list to select either to Measure From the Reference Point or the
Current Point.
The Pattern Count tab shows the location of the Pattern Location used in the measurement. Click Measure
Tool7.4.4 Measure Tool on page 186 for more information about the Measure tool.
Pattern Find and Pattern Count Tabs
201 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
P/N 000000
PresencePLUS Software Tools 7/2009