Metrohm VESUV - Manual (Page 95)

90
• 6. Database
Vesuv 3.0
If such a variable is used in a formula for calculation, its value
will be read in the line which you find under "Name", e.g. the
value of "SmplSize" will be used in formulas which contain
C00.
List of calculation variables for 726 Titroproces-
sor
The names of the variables in the "Variables + formulas" ta-
ble is different from the symbols used in the formula for the
following variables:
Symbol in formula Name
SS SmplSize
For the results you may either use the original name from the
726 Titroprocessor or RSX.
Formulas with the function "TST" (Test) of the 726 Titroproc-
essor cannot be recalculated by Vesuv.
If an endpoint is deleted or added in Vesuv, the endpoint
flags (EFX) will be actualized.
Reset original results
Menu item "Data, Original results" or
Recalculated data sets can also be reset to their original val-
ues. All variables and formulas are reset to their original val-
ues and endpoints are reset as they were evaluated by the
analytical device. The label in column "M" of the determina-
tions table is reset from 1 to 0.