Metrohm VESUV - Manual (Page 48)

Vesuv 3.0 5. Datalogger
• 43
Device window properties
General properties
Menu item: "Device, Properties, General"
Toolbar:
Mouse:
right mouse button in device window
Keyboard: Alt + Enter
Device name The device name is shown in the device win-
dow title line.
Device driver The device driver data are shown in the lower
part of the window. The device driver can only
be selected on adding a new device.
Communication
Menu item: "Device, Properties, Communication"
Toolbar:
Mouse:
right mouse button in device window
Keyboard: Alt + Enter
Port Port to which the instrument is connected.
The button can be used to alter
the communication parameters if the instrument
is connected to a COM.
To change the port the device window must first
be stopped.
Parameters Description of the port parameters for instru-
ments which are connected to a PC port or to
an extension board.
Timeout... Time in ms allowed to elapse after the Datalog-
ger has received the last character before data
evaluation begins.
If possible use the standard values for timeout.
Vesuv can send data to device
If this query is active ( ) then at the start the
Datalogger will send some commands to the in-
strument.
This query should only be deactivated when the
device cannot receive any data, e.g. when the
PC and balance are connected to the same RS
interface via distribution plugs on the device.