Metrohm VESUV User Manual
Page 9
4
• 1. Introduction
Vesuv 3.0
Installing Vesuv
Start Windows. Find a drive that has at least 100 Mbytes free
storage space.
Insert installation CD and open this drive. A start page with a
selection of programs appears. Select Vesuv 3.0.
During the installation, the following entries are requested:
•
language of Vesuv. The program is available in English
and German.
•
If you don't have an Internet Explorer 4.0 or higher on
your PC, you may install it in its standard version.
•
path where Vesuv should be installed
The 6.2145.040 (for up to 64 devices) or 6.2145.050 (for up
to 2 devices) Dongle is part of the scope of delivery of the full
program version. Set this Dongle on LPT-Port 1 or 2. The
printer cable is set onto the Dongle. Starting Vesuv, the
Dongle will be checked.
Please send us your registration card as soon as possible so
that we can register you as an official user of Vesuv. Only
registered users will get updated program versions at a spe-
cial price.
A demonstration version can be used for 100 days. After this
100 days you may continue to use the Vesuv database. The
datalogger is not accessible anymore, e.g. you can't receive
new data. You can upgrade your demonstration version at
any time if you set a 6.2145.040 or 6.2145.050 Dongle on the
LPT Port of your computer.
Uninstalling Vesuv
You can uninstall Vesuv at any time:
Windows
Settings
Control panel
Software
Select the program folder (usually Vesuv)
Button
After uninstalling Vesuv you will get a dialog with the button
not be deleted. All directories containing your own data will
not be deleted on uninstallation.