Metrohm VESUV - Manual (Page 45)

40
• 5. Datalogger
Vesuv 3.0
Device windows for analytical instruments
The name of the device window is shown in the
title bar.
User An operator name can be selected or entered
here. In order for a name to be selected it must
have been entered under the menu item
"Options, Settings", see page 60.
Remark You can enter a comment which will be stored
in the database together with the determination
data.
The comment can be altered after the determi-
nation and can be appended to the last data set
in the database with the button (or menu
item "Device, Append comment"). Any com-
ment which may already exist will be overwrit-
ten.
Status Shows the current device window status.
Titrations Shows the number of determinations which
have been received since the last time the de-
vice window was started in Vesuv.
Database Shows the name and path of the database in
which the determination data of the device win-
dow are stored.
At the bottom of the device window you can see
whether the instrument has been assigned a
balance and the name of the balance which has
been allocated. See page 54.
If the balance has been assigned automatically
then "Automatic" appears beside the balance
symbol.
At the bottom of the device window you can see
to which port the instrument is connected.
Each analytical device which is connected
has its own device window. This window
shows the most important information about
the device. When the window has been se-
lected the device window functions can be
operated with the right mouse button.