Metrohm VESUV - Manual (Page 21)

16
• 2. Connecting devices
Vesuv 3.0
730 Sample Changer
Cables
PC 25pin 6.2125.060
PC 9pin 6.2125.110
If possible work with the following RS parameters: 9600
Baud, 8 Data Bit, 1 Stop Bit and no parity. The handshake
must be set as follows:
•
HWs (if the Sample Changer is connected to a COM port)
•
SWchar (if the Sample Changer is connected via a Soft-
switch)
The RS parameters can be set on the Sample Changer in
key , >RS232 settings.
Notes
•
With the Sample Changer methods and configurations
can be stored and reloaded.
•
Reports from the Sample Changer can be stored in the
database and printed out on the PC printer.