Metrohm VESUV - Manual (Page 47)

42
• 5. Datalogger
Vesuv 3.0
Extended communication test
Menu item "Options, Extended communication test" or Ctrl +
Shift + T
Additional possibilities
Wait for line end in auto test
If your device does not send the line end auto-
matically (the device-specific line end is defined
in the device driver files) you can switch off
waiting for a line end.
Command You can send any command to the device. The
list of commands can be found on the green
pages of the corresponding Metrohm
“Instructions for use“ of the analytical devices.
Enter the command and press the
button.
Timeout Timeout for waiting for an answer from the in-
strument.
Add line end character to command
The PC automatically appends the character
sequence for the line end to the transmitted
data when the query is activated.