Reports – Metrohm VESUV User Manual
Page 53
48
• 5. Datalogger
Vesuv 3.0
Reports
Menu item:
"Device, Properties, Reports"
Toolbar:
Mouse:
right mouse button in device window
Keyboard:
Alt + Enter
This is where you can define what is to happen with the re-
ports sent from the devices to Vesuv. The functions are only
active if the device window has already been activated once.
If the selection fields are empty then exit the dialog "Device,
Device manager" and open the window "Device, Properties,
Reports" again.
Save, Raw reports:
The marked raw reports are stored in
the database and can be viewed there and
printed out, provided that the corresponding raw
reports have been transmitted by the analytical
instrument.
The
button deactivates them all.
Print immediately:
The marked raw reports are printed on
the PC printer immediately after the determina-
tion, provided that the corresponding raw re-
ports have been transmitted by the analytical
instrument.
The
button deactivates them all.
With the 726 Titroprocessor the raw reports
cannot be printed out directly after the determi-
nation. However, it is possible to print the raw
reports from the database.
Vesuv-Report:
The Vesuv report (including curve) is printed out
on the PC printer immediately after the determi-
nation.