Metrohm VESUV - Manual (Page 23)

18
• 2. Connecting devices
Vesuv 3.0
Balance
Balances with serial interfaces can be connected as follows:
Balance Cable
Sartorius MP8, MC1 6.2125.070, PC: 25pin
6.2134.060, PC: 9pin
Mettler AM, PM, AT 6.2146.020, PC: 25pin
6.2146.020 + 6.2125.010, PC: 9pin
AE (Opt. 011) 6.2125.020, PC: 25pin
6.2125.020 + 6.2125.010, PC: 9pin
PG 6.2125.130, PC: 25pin
6.2134.110, PC: 9pin
AB, AG, PR Mettler interface LC-RS25, PC:25pin
Mettler interface LC-RS9, PC:9pin
AND with RS232 (OP-03) 6.2125.020, PC: 25pin
6.2125.020 + 6.2125.010, PC: 9pin
Precisa with RS232-interface 6.2125.080, PC: 25pin
6.2125.080 + 6.2125.010, PC: 9pin
Notes
•
Connect the balance directly to a PC port or the port of
an extension board (not to Softswitch).
•
Transmit weights with their units.
•
Do not operate balance in "Continuous transmission"
mode