Metrohm VESUV - Manual (Page 25)

20
• 3. Tutorial
Vesuv 3.0
Working with the datalogger
Open the datalogger. You may have to login with your pass-
word if a login window appears.
The datalogger work bench appears. Each configured and
enabled device has its own device window:
If you don't see device windows on your datalogger work
bench because you don't have any configured devices, see
pages 8 and 35.
In the device window you can enter data for your daily ana-
lytical work and it provides some information as well:
In the lower part of the window you see the status of the de-
vice, the number of determinations since Vesuv was started
(or since you opened this configuration) and the name of the
database where the results are stored.
In the status bar of the device window you can see if a bal-
ance is assigned to this window and the COM of the PC
where the device is connected.
For data reception, the status of the device window has to be
"Waiting for data" (as in the figure above).
2 devices are enabled:
756 KF Coulometer and
702 Titrino.
You may enter or select (see page 60) your
name.
You may add a remark which will be stored
in the database together with your result.
This remark can also be assigned to the last
determination if you press the button .