Metrohm VESUV User Manual
Page 49
44
• 5. Datalogger
Vesuv 3.0
When you make new settings for the COM port or change it
you should check the communication, see page 41.
Device monitoring
Menu item:
"Device, Properties, Monitoring"
Toolbar:
Mouse:
right mouse button in device window
Keyboard:
Alt + Enter
The times for three different device conditions can be moni-
tored: Calibration, GLP test and service interval. When the
monitoring interval has elapsed a message is produced by
the PC. The corresponding test is activated by .
When the monitoring function responds a message is pro-
duced in the lower left part of the window. This message can
be edited with the
You can set the time interval or date to be
monitored, see below.
When you have carried out the test you can
confirm it. Confirmation resets the time counter
to zero or produces a query for the next moni-
toring date, see page 46.
You can view the device monitoring log file,
see page 46.
You can enter a message. This message
appears on the PC when the monitoring interval
has expired, see page 47.
Monitoring, editing dates
Menu item "Device, Properties, Monitoring,
This is where the dates for the device monitoring functions
are edited. When the set date is reached a message is
shown on the PC.
Interval
Select "Interval" if the monitoring is to respond at fixed time
intervals, e.g. daily or weekly.
Interval
Select:
. Hours
. Days
. Weeks