Metrohm VESUV - Manual (Page 17)

12
• 2. Connecting devices
Vesuv 3.0
737 KF Coulometer
Cables
PC 25pin 6.2125.060
PC 9pin 6.2125.110
If possible work with the following RS parameters: 9600
Baud, 8 Data Bit, 1 Stop Bit, no parity, handshake "HWs".
The Coulometer cannot be connected via a Softswitch.
The RS parameters can be set on the Coulometer in key
, >RS SETTINGS.
Notes
•
The 737 KF Coulometer can't be connected to a Soft-
switch. Connect it directly to a PC port or to a port of an
extension board.
•
If you want to show curves in the database then transmit
the measuring point list.
Settings under ", AUXILIARIES"
MP.LIST: ON
TIME INTERV. 1 S (the time interval must be smaller
than the timeout in Vesuv)