Metrohm IC Net 2.0 - Manual (Page 72)

6 Devices
IC Net 2.0 64
6.4 733 IC Separation Center
6.4.1 733 IC Separation Center features
The Metrohm 733 IC Separation Center is a thermally and
electronically isolated wet part which accommodates injectors,
columns, detectors, suppressor module and pulsation dampener
and is controlled by and connected to the 732 IC Detector. The
following versions are available:
• 2.733.0010 IC Separation Center with 1 injector
• 2.733.0020 IC Separation Center with 2 injectors
• 2.733.0120 IC Separation Center with 2 injectors, metal-free
• 2.733.0030 IC Separation Center with 1 injector and 1 sup-
pressor module
• 2.733.0130 IC Separation Center with 1 injector and 1 sup-
pressor module, metal-free
The 733 IC Separation Center, which is normally operated by the
732 IC Detector, can be fully operated using the «IC Net» pro-
gram. The 733 IC Separation Center with one injection valve is
normally connected to the 732 IC Detector using the 6.2125.090
cable. For the operation of a 733 IC Separation Center with two
injection valves, two individual 732 IC Detectors are needed.
Each of this detectors is connected to the 733 IC Separation
Center using a 6.2125.090 cable. For operation of a two-valve
system with «IC Net», two
732 icons
and two
733 icons
(one for
valve A and one for valve B) have to be installed in the
SYSTEM
window.
For detailed information about the 733 IC Separation Center see
732/733 Instructions for Use. Examples for interconnections
with the 733 IC Separation Center, the 732 IC Detector and the
762 IC Interface can be found in the 762 Instructions for Use.
6.4.2 733 IC Separation Center icon
The 733 icon is available in the SYSTEM window if a 733 IC Separa-
tion Center has been installed with the New system wizard or by
using the
Setup/New devices/Install new device
option of the
SYS-
TEM
window (see section 6.1.2).