Metrohm IC Net 2.0 - Manual (Page 141)

7.6 Report output
IC Net 2.0 133
Chromatogram plot
Plot of the chromatogram (only for
Printer
or
File destination).
Peak table Peak table with results. The structure of the
peak table depends on the selected
Quanti-
fication method
. The following report is put
out as default:
Quantitation method: Custom
No Retention Height Area Conc. Name
min mV mV*sec mg/L
1 3.04 1.85 21.062 0.079 fluoride
2 5.91 82.44 1703.350 7.173 chloride
3 6.83 3.58 97.495 0.000
4 14.29 29.27 969.705 7.561 nitrate
5 21.21 19.34 935.179 5.571 sulphate
_____________________________________________
5 25.01 136.48 3726.790 20.383
Comment
User defined comment from the
Comment
tab of the passport.
Method example for tap water determination.
GLP Log Method and Data GLP messages from the
Method Log and Data Log tabs of the pass-
port.
METHOD GLP LOG
09/11/1999 16:10:10 Metrohm
09/11/1999 16:10:17 MetrohmModified: Passport;
Method saved to disk file C:\Programme\Metrohm\IC Net 2.0\IC
Net\Methods\Multicalibration.mtw