Metrohm IC Net 2.0 - Manual (Page 143)

7.6 Report output
IC Net 2.0 135
Calibration defaults
Calibration parameters defined in the com-
ponent window and on the Math tab of the
Method setup window.
CALIBRATION
Channel: ch1
Method: External standard
Response: Area
Standard: No
IDENTIFICATION
Reference peaks: Height
Other peaks: Time
Retention units: min
Component table Component table.
No Retention Window% RF Conc. Index Type Group Name
1 3.05 5.0 2.623e-03 0.08 0.000 0 fluoride
2 5.92 5.0 4.356e-03 7.17 0.000 0 chloride
3 8.70 5.0 6.691e-03 0.00 0.000 0 nitrite
4 11.19 5.0 9.933e-03 0.00 0.000 0 bromide
5 14.60 5.0 7.912e-03 7.56 0.000 S 0 nitrate
6 16.80 5.0 1.556e-02 0.00 0.000 0 phosphate
7 21.26 5.0 6.021e-03 5.57 0.000 0 sulphate
Calibration results
Calibration results of the component win-
dow. For each component a new page with
calibration results and calibration curve is
put out.
CALIBRATION OF COMPONENT fluoride
Method: Multicalibration.mtw
Equation: Q = - 7.48163·A^2 + 0.00262326·A + 0.0233088
RSD: 0.691 %
Correlation coefficient: 0.999277
K3 = 0 K2 = -7.48163e-08 K1 = 0.00262326 K0 = 0.0233088
Base: Area
Ref.channel: ch1
ISTD:
Formula: Y=K2·X^2+K1·X+K0
Weight: 1
Level Height Area Conc. Volume Retention Used File
1 6.46 173 2 1 10.8 Yes g8140800.chw
2 34 897 10 1 10.8 Yes g8140823.chw
3 90.9 2.36e+03 25 1 10.8 Yes g8140858.chw
4 198 5.04e+03 50 1 10.8 Yes g8140929.chw