Metrohm IC Net 2.0 - Manual (Page 10)

1 Introduction
IC Net 2.0 2
Section 5 Interfaces
Installation, control and parameter settings of in-
terfaces
Section 6 Devices
Installation, control and parameter settings of de-
vices
Section 7 Methods
Method parameters, integration, calibration, quanti-
fication, report
Section 8 Chromatograms
Chromatogram appearance, peak editor
Section 9 Sample queue
Sample queue control and editor
Section 10 Batch reprocessing
Reprocessing of chromatograms
Section 11 Appendix
Software license, ordering designations, index
To find the required information, you will find it an advantage to
use either the Table of contents or the Index at the back.
This Software Manual describes only the installation and opera-
tion of Metrohm instruments. For details concerning the
Bischoff instruments, please refer to the on-line help in the pro-
gram and to the Bischoff instruction manuals.
Additional publications about ion chromatographic analyses are
available on request free of charge from your Metrohm agency.
The 8.732.2003 Metrohm Monograph «Ion chromatography»
provides an introduction to the theoretical fundamentals and
general information on separating columns and sample pre-
treatment.
The 8.732.2013 IC Applications Collection contains all the
Application Notes on the subject of ion chromatography and
can be updated at any time by downloading the latest applica-
tions from the Internet under «www.metrohm.ch». Last, but not
least, you will find detailed information on the separating columns
available from Metrohm and on special IC applications in the
relevant "Application Bulletins".
1.3 Notation and pictograms
The following notations are used in this software manual:
Range Menu item, parameter or entry value
SYSTEM STATE Program window