Metrohm IC Net 2.0 - Manual (Page 25)

4.1 System creation
IC Net 2.0 17
4 Systems
The combination of Metrohm and Bischoff devices connected to
an interface is called a system. The system includes all the set-
tings of the devices, their time program, the data acquisition pa-
rameters and the processing method which have been optimized
for the specific separating column and the determination to be
carried out with it. A system is used to start single determinations
or determinations with the help of a sample queue. Systems are
stored as system files ( *.smt ) in the Systems directory.
4.1 System creation
4.1.1 System wizard
IC NET / File / New / System
The
New system wizard
window and a new
SYSTEM
window are
opened. The
New system wizard guides you trough the installation
routine step-by-step to build a new system system. The next step of the
system installation is reached with , the previous step with
and the installation is completed with .
The first step of the system installation is to enter a name for a
new system folder within the «IC Net» program path
...\ICNet\Systems . For every instrument combination, a new folder
should be created.
After clicking on , the window for addition of interfaces to
the toolbar appears. This step can be skipped if the desired in-
terface has been already added to the toolbar (see section 5.1.2).
If this is not the case, the interface has to be selected from the
Metrohm Interfaces
or
Bischoff Interfaces
groups. After selecting the
serial port where the interface is connected to and clicking on