Rockwell Automation 2198-Hxxx Kinetix 5500 Servo Drives User Manual User Manual
Page 232
232
Rockwell Automation Publication 2198-UM001D-EN-P - May 2014
Appendix E
EC Certifications
Document Control Number: IMC-0040-D-EN
3 / 3
Catalogue number
Series
3
Description
Directive
4
EMC
LVD
MD
Motor Compatibility
1,2
VPL-Axxxxx-yyyyyy
230 Volt VP Low-inertia Servo Motor
Yes
Yes
N/R
VPL-Bxxxxx-yyyyyy
460 Volt VP Low-inertia Servo Motor
Yes
Yes
N/R
Cable Compatibility
1
2090-CSWM1DF-
YYAALL
Motor power/feedback cable for use with VP family
motors, YY = wire gauge, LL = length in meters
N/R
N/R
N/R
2090-CSBM1DF-
YYAALL
Motor power/feedback with brake cable for use with VP
family motors, YY = wire gauge, LL = length in meters
N/R
N/R
N/R
Connector Kits and Miscellaneous Accessories
2
2198-H040-x-x
Input wiring connectors and DC bus T connector for
frame 1 and 2 servo drives
N/R
N/R
N/R
2198-H070-x-x
Input wiring connectors and DC bus T connector for
frame 3 servo drive.
N/R
N/R
N/R
1585J-M8CBJM-x
Shielded Ethernet cable
N/R
N/R
N/R
1606-XLxxx
24V DC Power Supply
N/R
N/R
N/R
2198-KITCON-DSL
Replacement feedback connector kit for Kinetix 5500
N/R
N/R
N/R
2198-KITCON-IOSP
Replacement I/O connector kit (spring clamp) for IOD
connector
N/R
N/R
N/R
2198-KITCON-IOSC
Replacement I/O connector kit (screw terminal) for IOD
connector
N/R
N/R
N/R
2198-KITCON-PWR40
Replacement connector set, 40 Amp, for Kinetix 5500
Frame 1 & 2 drives
N/R
N/R
N/R
2198-KITCON-PWR70
Replacement connector set, 70 Amp, for Kinetix 5500
Frame 3 drives
N/R
N/R
N/R
1)
Only the following motor and cable families are compatible with the Kinetix 5500 servo drives.
2)
The following letters are used in the compatibility matrix to indicate model number description fields that do not
affect this DoC: x, y. These fields may be filled with any number(s) or letter(s).
3)
If no series number is given, then all series are covered.
4)
Legend as follows:
No = Product is not certified to this directive.
Yes = Product is certified to this directive.
N/R = this directive is not required for this product