Rockwell Automation 2198-Hxxx Kinetix 5500 Servo Drives User Manual User Manual
Page 231
Rockwell Automation Publication 2198-UM001D-EN-P - May 2014
231
EC Certifications
Appendix E
Document Control Number: IMC-0040-D-EN
2 / 3
Catalogue number
Series
3
Description
Directive
4
EMC
LVD
MD
Bulletin 2198 Servo Drives
1
2198-H003-ERS
Kinetix 5500, Frame 1, 195-528Vrms, 0.6 kW, Inverter
1.0Amp, Safe Torque-Off
Yes
Yes
Yes
2198-H008-ERS
Kinetix 5500, Frame 1, 195-528Vrms, 1.6 kW, Inverter
2.5Amp, Safe Torque-Off
Yes
Yes
Yes
2198-H015-ERS
Kinetix 5500, Frame 2, 195-528Vrms, 3.2 kW, Inverter
5.0Amp, Safe Torque-Off
Yes
Yes
Yes
2198-H025-ERS
Kinetix 5500, Frame 2, 195-528Vrms, 5.2 kW, Inverter
8.0Amp, Safe Torque-Off
Yes
Yes
Yes
2198-H040-ERS
Kinetix 5500, Frame 2, 195-528Vrms, 8.4 kW, Inverter
13.0Amp, Safe Torque-Off
Yes
Yes
Yes
2198-H070-ERS
Kinetix 5500, Frame 3, 195-528Vrms, 14.9 kW, Inverter
23.0Amp, Safe Torque-Off
Yes
Yes
Yes
2198-H003-ERS2
Kinetix 5500, Frame 1, 195-528Vrms, 0.6 kW, Inverter
1.0Amp, Network Safe Torque-Off
Yes
Yes
Yes
2198-H008-ERS2
Kinetix 5500, Frame 1, 195-528Vrms, 1.6 kW, Inverter
2.5Amp, Network Safe Torque-Off
Yes
Yes
Yes
2198-H015-ERS2
Kinetix 5500, Frame 2, 195-528Vrms, 3.2 kW, Inverter
5.0Amp, Network Safe Torque-Off
Yes
Yes
Yes
2198-H025-ERS2
Kinetix 5500, Frame 2, 195-528Vrms, 5.2 kW, Inverter
8.0Amp, Network Safe Torque-Off
Yes
Yes
Yes
2198-H040-ERS2
Kinetix 5500, Frame 2, 195-528Vrms, 8.4 kW, Inverter
13.0Amp, Network Safe Torque-Off
Yes
Yes
Yes
2198-H070-ERS2
Kinetix 5500, Frame 3, 195-528Vrms, 14.9 kW, Inverter
23.0Amp, Network Safe Torque-Off
Yes
Yes
Yes
AC Line Filters
2198-DB08-F
460 Volt 7.5 Amp Three-Phase AC Line Filter
Yes
Yes
N/R
2198-DB20-F
460 Volt 20 Amp Three-Phase AC Line Filter
Yes
Yes
N/R
2198-DB42-F
460 Volt 42 Amp Three-Phase AC Line Filter
Yes
Yes
N/R
Shunts
2097-R6
75 Ohm, 150W, External Shunt Resistor
Yes
Yes
N/R
2097-R7
150 Ohm, 80 W, External Shunt Resistor
Yes
Yes
N/R
Capacitor Module
2198-CAPMOD-1300
Kinetix5500 Capacitor Module
Yes
Yes
N/R
1)
Only the following motor and cable families are compatible with the Kinetix 5500 servo drives.
2)
The following letters are used in the compatibility matrix to indicate model number description fields that do not
affect this DoC: x, y. These fields may be filled with any number(s) or letter(s).
3)
If no series number is given, then all series are covered.
4)
Legend as follows:
No = Product is not certified to this directive.
Yes = Product is certified to this directive.
N/R = this directive is not required for this product