Rockwell Automation 2198-Hxxx Kinetix 5500 Servo Drives User Manual - Manual (Page 216)

216 Rockwell Automation Publication 2198-UM001D-EN-P - May 2014
Appendix C Sizing Multi-axis Shared-bus Configurations
Shared AC/DC Configurations
In a shared AC/DC configuration, the first (leftmost) drive receives AC input
voltage. The shared-bus connection system extends the AC and DC bus to all
downstream drives:
• All drives are configured in the project file as Shared AC/DC drives.
• Drives must be of the same power rating (catalog number).
• Shared AC/DC configurations support Bulletin 2198 capacitor modules
• Total available converter power is derated by 30%.
• The maximum number of drives configured as Shared AC/DC is
described in Table 87 .
Table 87 - Shared AC/DC Panel Layout
Figure 101 - Typical Shared AC/DC Configuration
For an example shared AC/DC installation with additional details, refer to
Typical Shared AC/DC Installations on page 17 .
Drive Cat. No. Frame Size Drives Configured as Shared AC/DC, max
(1)
(1) For Bulletin 2198 capacitor module maximum values, refer to the Kinetix 5500 Capacitor Module Installation Instructions,
publication 2198-IN004 .
Number of Capacitor
Modules, max
2198-H003-ERSx
1 8
0
2198-H008-ERSx 1
2198-H015-ERSx
2 4 4 2198-H025-ERSx
2198-H040-ERSx
2198-H070-ERSx 3 2 4
Bonded Cabinet
Ground
Three-phase
Input Power
Kinetix 5500 Servo Drives
(top view)
24V Input
Control Power
DC Bus Connections
2198-CAPMOD-1300 Capacitor Module
(optional component)