Rockwell Automation Migrating PanelView Enhanced Terminal Applications - Manual (Page 73)

Publication 2711P-QS001A-EN-P - October 2007 73
Review Unsupported Features and Implement Workarounds for Migration Issues Chapter 6
9. Draw four ramp buttons on
the display so the operator
can navigate through each
set bit cursor point object.
Use a left, right, up and
down ramp button.
10. Double-click one of the
ramp buttons and select
properties for a left ramp
button.
a. Set the Ramp down
Lower limit to 1.
b. Set the Ramp value to 1.
c. On the Label tab, set the
Image to Arrow Left.
d. On the Connection tab,
set the Value connection
to the same tag in step 8.
Label Tab
Connections Tab