Rockwell Automation Migrating PanelView Enhanced Terminal Applications - Manual (Page 101)

Publication 2711P-QS001A-EN-P - October 2007 101
Qualify the Runtime Application Chapter 7
4. Configure the global
memory connections to
monitor the amount RAM
used by the runtime
application.
Refer to the table for a
description of each
connection.
5. Click OK.
TIP
Assign these tags to a display or trend object in your
application so that you can monitor memory usage at runtime.
Global Memory Connections
For this global connection Assign this tag type Connection Type
MERuntime RAM Usage When this connection is assigned, and the
Remote RAM Usage connection is set to a
nonzero value the application writes the KB
of RAM used by the runtime application to
this connection, once every 10 seconds. Analog Tag Read-write
Total RAM Usage When this connection is assigned and the
Remote RAM Usage connection is set to a
nonzero value, the application writes the
total KB of RAM used by all processes
running on the terminal to this connection,
once every 10 seconds. Analog tag Read-write
Available RAM When this connection is assigned and the
Remote RAM Usage connection is set to a
nonzero value, the application writes the
the amount of unused KB of RAM on the
runtime terminal to the Available RAM
connection, once every 10 seconds. Analog tag Read-write
Remote RAM Usage When this connection is set to a nonzero
value, the MERuntime RAM Usage, Total
RAM Usage and Available RAM Usage
connections are active. Assign a tag or an
expression Read-write