Rockwell Automation Migrating PanelView Enhanced Terminal Applications - Manual (Page 107)

Publication 2711P-QS001A-EN-P - October 2007 107
Qualify the Runtime Application Chapter 7
3. In the Communication Setup
dialog, select the local tab.
4. Right-click RSLinx Enterprise
and select Add Driver.
5. Select the DH+ (1784-PKTX,
2711P-RN6, 2711P-RN8)
driver and click OK.
6. Configure DH+ Properties.
a. Accept the default name.
b. Set the station number to
a unique number not
used by any other device
on this network.
c. Set the jumper ID to
match the jumpers on the
1784-PKTX card.
d. Set the baud rate of DH+
network to match the
device you are
connecting too.
e. Click OK
7. Right-click the DH+ driver
and select Add Device.