Rockwell Automation Migrating PanelView Enhanced Terminal Applications - Manual (Page 118)

118 Publication 2711P-QS001A-EN-P - October 2007
Chapter 8 Create the Runtime Application
Download Application Using a CompactFlash Card
Follow these steps to load the runtime application to the PanelView
Plus terminal using a CompactFlash card.
1. On your computer, copy the
runtime application file to
the runtime folder on a
CompactFlash card
supported by the PanelView
Plus terminal.
2. Turn off power to the
terminal.
3. Load the CompactFlash card
into the card slot of the
PanelView Plus terminal.
4. Turn on power to the
PanelView Plus terminal.
5. On the configuration
display, press Load
Application button or press
the [F1} function key on the
terminal.
IMPORTANT
The root of the CompactFlash card must have the path
‘RockwellSoftware\RSViewME\Runtime’ or the application file
will not be recognized at runtime.