Rockwell Automation Migrating PanelView Enhanced Terminal Applications - Manual (Page 108)

108 Publication 2711P-QS001A-EN-P - October 2007
Chapter 7 Qualify the Runtime Application
8. In the Add Device Section,
browse the folders and
select the device your
terminal will be connecting
to and click OK.
9. Depending on the device
you selected you may need
to configure the IP, Slot or
Address of that device on
your network.
10. Click Add to add a device
shortcut and name it to the
original topic name the
PanelView e used.
11. Expand the DHPlus, DH+
driver and select your
device.
12. Select your shortcut and the
device under the DH+
driver and click Apply.
13. Click Copy to copy the local
configuration to the Target
Tab.
14. Click Yes
15. Click OK to save the
changes.