Rockwell Automation 2706-ND1 DL40 OFFLINE PROGRAMMING SFTWR.USER MANUAL - Manual (Page 49)

Chapter 5
The Develop Menu
5 – 4
Notes
Use the arrow keys to move to the file you want to edit and press [
↵
] . If the
name of the file you want to edit does not appear here, you may be using the
wrong data path. You can change the data path by backing up and selecting
Directory on the Develop menu.
When Create New File is selected on the Develop menu, the program will
present a window in which you can type name a new file. Type in the file
name and press
[
↵
] . You can type a drive and directory path as well if you
do not want to store the file on the current data path.
Figure 5.3
Create New File pop-up window
Flashing cursor
If the default path is to be used, enter only
the file name. If a path other than the
default path is to be used, enter the path
in the form: Drive:\Directory\File.
Special keys
You may use the following special keys on this window.
← → Moves the cursor forward or backward through the file name to allow
editing
↵ Accepts the file name (and path, if applicable). (Goes to Develop Screen
illustrated in Figure 5.5)
Returns to the top level of the Develop menu
Get Online Help
Create New File Pop-up
Window