Rockwell Automation 1756-OF8H ControlLogix HART Analog I/O Modules - Manual (Page 103)

Rockwell Automation Publication 1756-UM533C-EN-P - February 2011 103
Configure the Modules with RSLogix 5000 Software Chapter 7
Alarm Tab -
1756-IF8H Module The following information describes how to configure the parameters on the
Alarm tab for the 1756-IF8H module. For more information, see
Process Alarms
on page 58 and Rate Alarm on page 59 .
Table 23 - Module Filter Values
Module Filter, Hz C.ModuleFilter
10
(1)
0
15 7
20 6
50 1
60 (default) 2
100 3
250 4
1000 (2) 5
(1) 10 Hz not supported in the 1756-IF16H module.
(2) Do not choose 1000 with HART enabled.