Rockwell Automation 1756-HIST2G Historian ME 2.1 - Manual (Page 162)

F ACTORY T ALK H ISTORIAN ME M ODULE U SER ’ S G UIDE
152
Shutting Down
To shut down the module, click Advanced in the top navigation bar, and then click
Module Shutdown
in the left navigation bar. The Module Shutdown section displays a
message:
“Module shutdown will stop all FTH ME related services.
Close Module Shutdown, and then remove and re-insert
the ME Module. The FTH ME Web will be available after
the ME Module has been re-inserted.”
The Module Shutdown feature allows users to stop all services, including Point
Server, Data Collection, Data Transfer, and web configuration. It is recommended
that you shut down the module if you plan to remove it from the chassis or if you are
going to power down the chassis.
Module shutdown is complete when the scrolling message on the module displays the
module’s IP address followed by SHUTDOWN.
You can also shut down the module using the FactoryTalk Historian ME Add-on
Profile (AOP) in RSLogix 5000.
See “Using the AOP Module Properties Configuration Tab” for more information.
Remove the module
from the chassis after
executing the [Module
Shutdown] command.