Lenze EVS93xx FlyingSaw - Manual (Page 9)

FlyingSaw
Preface and general information
Prepared Solution Servo PLC / ECSxA 1.1 EN page 1-5
1.4.1 Parameterisable variant
With the parameterisable variant all basic functions and the selection of the interface signals are
defined solely by the use of parameters (codes). As a result a uniform, predefined interface is
provided to the user. Typical signal wires, terminal assignments, interfaces to data bus systems,
etc. can be selected via parameters (codes). Therefore the parameterisable variant of the
Prepared Solution provides the quickest commissioning without restricting the functionality of
the Prepared Solution in any way:
= Internal program parts of the Prepared Solution
= Parts of the Prepared Solution that can be changed by the user
The system is configured entirely using codes (parameter interface). The function of the
individual codes for setting parameters is listed in chapter 11.3.1.