Lenze EVS93xx FlyingSaw - Manual (Page 61)

FlyingSaw
Commissioning the "(Flying Saw)"
Prepared Solution Servo PLC / ECSxA 1.1 EN page 4-48
Connect your PC/laptop to the system bus for the servo axis using the PC-system bus adapter EMF2177IB /
EMF2173IB (it is also possible that you have several axes in the drive system):
TIP!
To make it easier to make the connection a three-pin system bus connector is included with the
PC-system bus adapter EMF2177IB / EMF2173IB; using this connector the PC-system bus
adapter can be straightforwardly connected to the system bus.
Switch back on the control voltage on the servo controller.
Step 4
Step 3
PC/laptop PC-system bus
converter
System
bus Servo
controller