Lenze EVS93xx FlyingSaw - Manual (Page 117)

FlyingSaw
Description of the function blocks
Prepared Solution Servo PLC / ECSxA 1.1 EN 10-19
Outputs (Variable type: VAR_OUTPUT)
Identifier Data type Meaning
wDCTRL_wCAN1Ctrl WORD Output of the control word for the system variable DCTRL_wCAN1Ctrl
wDCTRL_wAIF1Ctrl WORD Output of the control word for the system variable DCTRL_wAIF1Ctrl
wCtrlW1_a INT Output of the data word (depending on the value on byInputSource derived from the variables
wInternalCtrlW1_a, wCAN1_nInW1_a, wCAN2_nInW2_a, wCAN3_nInW2_a, wAIF1_nInW1_a,
wAIF2_nInW2_a or wAIF3_nInW2_a)
bBit00
bBit01
bBit02
bBit03
…
bBit30
bBit31
BOOL Control bits 0 to 31:
The individual bits are formed from the internal double control word dwCtrlWord. Here any output bit
bBit00, bBit01 … bBit31 can be assigned to any bit in the double control word (dwCtrlWord.0 …
dwCtrlWord.31). The internal index variable abyCtrlWord[i] (i = 0 … 31) is used for the assignment; the
index i addresses the required output bit bBit00, bBit01 … bBit31 and the value of abyCtrlWord[i] the
required source bit in the double control word (dwCtrlWord.0 … dwCtrlWord.31). The value range
allowed for abyCtrlWord[i] is 0 … 31.