Lenze EVS93xx FlyingSaw - Manual (Page 72)

FlyingSaw
Commissioning the "(Flying Saw)"
Prepared Solution Servo PLC / ECSxA 1.1 EN page 4-59
Now save the parameter set as follows:
Click code C0003 to save the parameter set:
C0003/000 = Save parameter set
A dialog box for code C0003 opens.
The parameter settings are now saved safe against mains failure.
The basic settings for the peripheral drive functions are now complete.
End
Step 10
Select the option 1 "Psatz 1 speichern"
(Save parameter set).
Accept using Ok.
Step 11