Lenze EVS93xx FlyingSaw - Manual (Page 25)

FlyingSaw
Features of the Prepared Solution
Prepared Solution Servo PLC / ECSxA 1.1 EN page 2-12
2.8 "Start gap" function
Using the "start gap" function the items cut can be separated after cutting.
t
V
Sägegeschwindig-
keitsverlauf
t
Ausgang
„Synchronlauf
erreicht“
t
V
Material- / Bahn-
geschwindigkeit
t
Eingang
„Sägung
beendet“
Ausgang
„Grundposition
erreicht“
t
Eingang
„Lücke fahren“
t
Ausgang
„Lücke fahren
ausgeführt“
Using the "make gap" function the saw carriage is briefly moved oversynchronously in relation
to the material before the saw blade is pulled out. In this way a gap forms between the cut edge
and the saw blade and marks from saw blade on the cut edge are prevented. This function is
suitable for cut edge protection for delicate material. This function can also be used for
separating the cut material.
line-speed
saw-speed
signal „axis-synchron“
start gap
cut ready
home-pos avail
status: gap ready