3 connecting function blocks, Connecting function blocks, Function library – Lenze EVS9332xS User Manual
Page 58: Working with function blocks, Stop, General rules, Assign a signal source to an input, One input can have only one signal source, Only signals of the same type can be connected
Function library
Working with function blocks
3.1.3
Connecting function blocks
3−6
l
EDSVS9332S−EXT EN 2.0
3.1.3
Connecting function blocks
General rules
l
Assign a signal source to an input.
l
One input can have only one signal source.
l
Inputs of different function blocks can have the same signal source.
l
Only signals of the same type can be connected.
(
Stop!
Existing connections which are not required must be removed by reconfiguration.
Otherwise the drive cannot perform the desired function.
AND1
&
AND1−IN1
AND1−IN2
AND1−IN3
AND1−OUT
C0821/1
C0821/2
C0821/3
C0820/1
C0820/2
C0820/3
OR1
|1
OR1−IN1
OR1−IN2
OR1−IN3
OR1−OUT
C0831/1
C0831/2
C0831/3
C0830/1
C0830/2
C0830/3
NOT1
1
NOT1−OUT
NOT1−IN
C0841
NOT2
1
NOT2−OUT
NOT2−IN
C0843
C0840
C0842
t
0
DIGDEL1−IN
C0724
DIGDEL1−OUT
DIGDEL1
C0721
C0720
C0723
Connection not possible
Connection is possible
X
Fig. 3−2
Correct connection of function blocks